Vista locks up after loading disk.sys Please Help

Discussion in 'General Technical' started by jalessi, Jul 28, 2006.

  1. jalessi

    jalessi

    Joined:
    Jul 28, 2006
    Messages:
    2
    Likes Received:
    0
    I have a ECS RC410L System Board, with ATI Radion 200 Chipset and embedded video also part of the ATI chipset. The Southbridge is SB450

    Vista locks up every time , I tried safe mode and it locks after loading disk.sys

    The system only has a hard drive and DVD nothing else.

    I have tried using a pci-e video card still same problem,

    I have tried clean install several times still same problem.

    Please Help!

    jalessi@aol.com
     
    jalessi, Jul 28, 2006
    #1
    1. Advertisements

  2. jalessi

    Jason

    Joined:
    Sep 26, 2005
    Messages:
    2,081
    Likes Received:
    0
    Location:
    Chicago,IL
    Is the install completing 100%?
     
    Jason, Jul 28, 2006
    #2
    1. Advertisements

  3. jalessi

    jalessi

    Joined:
    Jul 28, 2006
    Messages:
    2
    Likes Received:
    0
    I just applyed a Bois upgrade to my system board and now my system finishes booting and go to a screen that asks for the serial number, after I install the serial number windows replys that THE SETUP FAILED TO OPEN THE WINDOWS IMAGE FILE.

    Then it reboots the system and askes for the srial number again and then repeats the same problem (THE SETUP FAILED TO OPEN THE WINDOWS IMAGE FILE)

    Please help!
     
    jalessi, Jul 29, 2006
    #3
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.