|
| | |
Group: Forum Members
Last Login: 10/24/2009 1:57:25 PM
Posts: 2, Visits: 2 |
| When I go to the page where you select what drive/partition you want it to install on I click "load driver",and load my chipset/RAID driver. My two drives and on RAID 0, they are both 40gb. in my RAID configure it comes out to be like 78gb for the two. In vista its 72gb. So I click New and it gives me that error ("Failed to create a new partition on the selected unused space"). When I make the partition using 70gb of the unollocated space it takes about 5-10 minutes then pops up again but with a different number at the end. Any ideas? I tried "dd if=/dev/zero of =/dev/sda bs=128k & dd if=/dev/zero of =/dev/sdb bs=128k" from the linux live cd and still no luck. I also created a ntfs (no luck) and a fat file system on them. I am using the newest driver from asus's site.
Anyone know whats going on?
~NL |
| |
| | | |
Group: Forum Members
Last Login: 10/24/2009 1:57:25 PM
Posts: 2, Visits: 2 |
| | also I set it from 64 to 128 in my raid configuration. |
| |
| |
|