|
| | | | I often start a full backup and leave my computer, only to come back at
the end of the day to find that the backup failed:
"A shadow copy could not be created for the following reason:
The shadow copy provider had an unexpected error while trying to process
the specified operation."
Not sure what's going on. I look in the Event Viewer and I see two items:
"Volume Shadow Copy Service error: Error calling a routine on a Shadow
Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details
PreFinalCommitSnapshots({b78c3744-6858-4c09-8bb1-db299de7cae9}, 1) [hr =
0x8000ffff].
Operation:
Executing Asynchronous Operation
Context:
Current State: DoSnapshotSet"
and then a split-second later:
"File backup failed because a shadow copy could not be created. The
system might be low on resources. The error is: The shadow copy provider
had an unexpected error while trying to process the specified operation.
(0x8004230F)."
I can't imagine that I'm low on resources since I closed all apps.
Thanks much for any thoughts on this.
|
| |
| | | | | Post in reply to: Rick
In article ,
Maximum disk space for shadow copies. I think it's under Volume0>
Properties.
|
| |
| | | | | Post in reply to: the wharf rat
Thanks -- I don't see this setting anywhere. I looked in all tabs of my
C: drive Properties and don't see this setting. I have a 300 GB drive
that's only 25% full -- I can't imagine it's a problem of disk space,
especially cause it only happens occasionally. It seems that
something's causing it to hiccup but I can't figure out what this item
in the Event Viewer is telling me.
|
| |
| | | | | Post in reply to: Rick
In article ,
Disc Cleanup, More Options tab, System Restore and Shadow Copies,
click Cleanup. That will *also* delete all but your most recent restore
point, though, so you might want to use vssadmin from the command line:
This is a pain. VSS reserves 15% of the disc for shadow copies.
If you have a 300GB disc that's 45GB. You can make that lower by opening
a DOS window and typing vssadmin resize shadowstorage /on=c: for=c: /maxsize=30GB
or you can delete the oldest shadow copy with
vssadmin delete shadows /for=c: /oldest, or /all will delete all of them
if you really want to.
I was sure this was available through a properties page somewhere
but can't seem to find it in vista. Here's a pretty good explanation of
vssadmin + a stupid hack to get around it not being in the properties page on
Vista.
http://www.mydigitallife.info/2007/06/26/how-to-change-and-limit-system-restore-storage-space-usage-size-in-vista-with-vssadmin/
Oh, BTW, you can put the shadow copies for C: on some other drive
if you need more space on c:
vssadmin resize shadowstorage /for=c: /on=d: maxsize=50GB
for instance. vssadmin list shadowstorage will get you oriented.
Remember to run as administrator...
|
| |
| | | | | Post in reply to: the wharf rat
[a week later...] I figured VSSADMIN was the way to go, but after
typing the command in the command prompt I'm being told that I don't
have the correct privileges to run this command and that I need
"elevated administrator privileges". I'm the only user on my computer,
and I *am* the administrator. Help! Thanks.
l2h41w2IHA.5024@TK2MSFTNGP03.phx.gbl>,
|
| |
| | | | | Post in reply to: Rick
Find "Command Prompt" under All Programs/Accessories
Right-click, Run as administrator
l2h41w2IHA.5024@TK2MSFTNGP03.phx.gbl>,
|
| |
| | | | | Post in reply to: PD43
OK, thanks. For my 300 GB drive here's what I see:
Used Shadow Copy Storage space: 28.97 GB
Allocated Shadow Copy Storage space: 30.855 GB
Maximum Shadow Copy Storage space: 43.561 GB
Is there any reason why these settings would cause my problem of backups
not completing and generating this error:
A shadow copy could not be created for the following reason:
The shadow copy provider had an unexpected error while trying to process
the specified operation."
Thanks for any help.
l2h41w2IHA.5024@TK2MSFTNGP03.phx.gbl>,
|
| |
| | | | | Post in reply to: Rick
Those are normal settings for a drive that size and they shouldn't be
causing you any problems.
l2h41w2IHA.5024@TK2MSFTNGP03.phx.gbl>,
|
| |
| | | | | Post in reply to: Post in reply to: Nonny
In article ,
UNLESS his new shadow copy (which depends on changed blocks) requires
more than 15GB.
It's not likely, because that would require actually changing 15GB
of data. What I bet is happening is that the guy writes a full backup of his
10-15GB of used space to a .bkf on C:. The next backup pass makes...a shadow
copy of that 15GB of "new" data. So his .bkf's AND the associated file system
shadow copy grows by like a factor of 2 at each backup pass.
Bet you lunch that if you remove the current shadow copies and
create a full backup on an EXTERNAL or SECOND INTERNAL drive the problem
goes away.
Or run backup without making a shadow copy. You won't be able to
back up open files but on a quiet single user system that shouldn't be a
total lose.
|
| |
| | | | | Post in reply to: the wharf rat
Ah, thanks. Maybe this is a clue: I always set it for a full backup --
at least that's my plan -- once a week. (I'm backing up to a USB drive
on drive J: -- I assume that's an 'External' Backup, right?) I've
turned off Vista's incremental backup feature (which I guess is called
'Automatic backup') since I figure just doing a full backup once a week
is all I need. So after I do that new, full backup (which now usually
fails!) I turn off Automatic Backup since Vista seems to always turn it
back on after either a successful backup or an unsuccessful backup ( and
like I say it mostly is unsuccessful now).
Maybe all these shenanigans are causing the problem?
How do I remove the current shadow copies? Is that the same as removing
all but the most recent restore point as explained in that "Reclaim and
Release Disk Space from System Restore and Shadow Copies" article?
I just looked at Vista's Backup and I don't see how to do it without a
Shadow Copy.
Thanks for all your help; much appreciated.
|
| |
| |
|