|
| | | 
Administrator
Group: Administrators
Last Login: 11/11/2008 9:24:04 PM
Posts: 2,103, Visits: 2,251 |
| niffer022 (6/18/2006)
before you do that mate, go into proper windows and although you only get 10min screen time that plenty enough to right click on desktop and click properties, changes screen size down a level.. see if that works.... might just be cos of the lack of driver support it wont let your gfx card run as good....
fingers as crossed for you mate........ 
True, you can also try changing the color mode from 256 or whatever to something lower. Definitly try the screen resolution.
AMD64 X2 5200+ 2.60GHz | 3GB DDR 667 | RAID 0 SATA3.0 WD Caviars 320GB total | Foxconn MCP61VM2MA-RS2H Geforce 6100 nforce400 chipset | Vista Ultimate x86
 |
| |
| | | |
Group: Forum Members
Last Login: 6/30/2006 10:50:02 AM
Posts: 1, Visits: 7 |
| i have same exact problem - radeon 9700 intel 875dbz board 3ghz 1gig dual channel ram...
i just googled and found this thead.. |
| |
| | | |
Group: Forum Members
Last Login: 7/2/2006 2:50:29 PM
Posts: 1, Visits: 6 |
| | I also have the same problem with the Vista beta? The computer boots ok, but just before it enters the windows desktop mode the signal to the monitor gets cutoff. Monitor LED goes from green to amble as if monitor is waiting for signal. The monitor is viewsonic VP191b LCD, I am using the digital input I have tried analog no luck. The hard drive is still loading windows, but no signal. I can boot into safe mode OK. This is a fresh install of 32 bit version of vista build 5384, with only the updates loaded, I have tried both the ATI drivers from MS and ATI with no luck. No problem with hardware as all works ok with XP. Thanks Simon
DFI LanParty UT CFX3200-DR RD580
Bios R5ud425 (04/25/2006)
AMD Athlon 64 X2 4400+ Toledo
2x 1GB PC-4000 Crucial Ballistix
Powercolor Radeon X800GT0 256mb PCI-E x16
SoundBlaster X-FI Pro
Hitachi Deskstar 80GB SATA-I 8MB
NEC Black DVD+/-RW N4550 - IDE 1/0
Seasonic S12 600W Silent ATX2.0 Power Supply |
| |
| |
|