|
| | | |
Hello,
I have a Vista Home Premium x64 installed on RAID 0+1 Matrix. Some day
I had to reset the system because the system was hang on. After that,
when I start the computer, I see in BIOS message for martix RAID: Status
"Verify" in yellow color(before was "Normal" in green) and the system
load/starts much much slower than before. HDD LED is lighted all the
time on front panel, but the system (after slow start) works OK. What I
have to do to back to "Normal" status from "Verify" status RAID matrix
in BIOS during start the computer.
Thank you in advance,
Best regards
Trutta
Mobo Asus P5K-E, Q6600, OCZ RAM, HDD 4x250GB WD
--
Trutta
|
| |
| | | | | Post in reply to: Trutta
One of the drives in the array has failed. You'll have to figure out which
one and replace it. See the documentation for your RAID controller. It may
be that the drive hasn't actually failed. Some consumer drives don't work
that well with RAID. They get a lot of timing errors. Eventually the RAID
controller thinks the drive has a problem because of all the errors and
removes it from the array.
--
Kerry Brown
MS-MVP - Windows Desktop Experience: Systems Administration
http://www.vistahelp.ca/phpBB2/
|
| |
| | | | |
I installed the newest Intel Matrix Storage Manager and I solved the
problem stressless from Windows level.
Thx
--
Trutta
|
| |
| |
|